Hi, I'm an error. x

SWMM Model of the Milandre Cave (Switzerland)


Authors:
Owners:
Resource type: Model Instance Resource
Storage: The size of this resource is 3.8 GB
Created: Nov 06, 2019 at 3:32 p.m.
Last updated: Nov 10, 2019 at 10:35 a.m.
DOI: 10.4211/hs.c647e1fab5874f29bf2e92f56f3e1f94
Citation: See how to cite this resource
Sharing Status: Published
Views: 33
Downloads: 0
+1 Votes: Be the first one to  +1 this.  (You need to be logged in to rate this.)
Comments: No comments (yet)

Abstract

This dataset contains the input and output files of a hydraulic model (EPA Storm Water Management Model (SWMM)) of the downstream part of the Milandre Cave (Switzerland). The aim of the model is to simulate sediment transport processes in the karst conduits, which is done as a post-processing step.

The model is based on the cave survey and calibrated on the basis of hydraulic head, flow rate and tracer test data. The software version is SWMM5.0.019 for Linux. The simulation results (flow rates, hydraulic heads, flow velocities) are used to compute the mean boundary shear stress and the shear velocity in the conduits in order to assess sediment transport processes.

Subject Keywords

  • No subject keywords have been added.
  • ${ k }

Duplicate. Keyword not added.

Error: ${ error }
Deleting all keywords will set the resource sharing status to private.

Resource Level Coverage

Spatial

Coordinate System/Geographic Projection:
WGS 84 EPSG:4326
Coordinate Units:
Decimal degrees
Place/Area Name:
Milandre Cave
North Latitude
47.4918°
East Longitude
7.0204°
South Latitude
47.4771°
West Longitude
7.0110°

Temporal

Start Date:
End Date:

Content

readme.md

List of files

flow.dat

Computed flow rates in litres per second [L/s]. Rows are time steps and columns are model nodes.

head.dat

Computed hydraulic heads in meter above sea level [m a.s.l.]. Rows are time steps and columns are model nodes.

inflow2004-2015.dat

SWMM input file. Time series of inflow in litres per second [L/s] at model most upstream node.

Milandre.inp

SWMM main input file

shear_stress.dat

Computed mean boundary shear stress in Newton per square meter [N/m2]. Rows are time steps and columns are model links.

shear_velocity.dat

Computed shear velocity in meter per second [m/s]. Rows are time steps and columns are model links.

veloc.dat

Computed flow velocity in meter per second [m/s]. Rows are time steps and columns are model links.

Resource Specific

Model Output
Includes output files? Yes

Executed By
Name Storm Water Management Model (SWMM)
Version 5.1.010
Resource URI

References

Related Resources

This resource is described by: http://doc.rero.ch/record/306843
This resource is described by: https://doi.org/10.1007/s10040-019-02006-y

Credits

Contributors

People that contributed technically, materially, financially, or provided general support for the creation of the resource's content but are not considered authors.

Name Organization Address Phone Author Identifiers
Pierre Perrochet University of Neuchatel
Pierre-Yves Jeannin Swiss Institute for Speleology and Karst Studies

How to Cite

Vuilleumier, C. (2019). SWMM Model of the Milandre Cave (Switzerland), HydroShare, https://doi.org/10.4211/hs.c647e1fab5874f29bf2e92f56f3e1f94

This resource is shared under the Creative Commons Attribution CC BY.

 http://creativecommons.org/licenses/by/4.0/
CC-BY

Comments

There are currently no comments

New Comment

required